<< Previous || Index || Next >>


Introduction

It is assumed that you came to this guide from one of the main sites, if not, see the Jaguar forum for more specific information on this design.

The goal of the Jaguar project is to create a hardware solution for FreeEMS that caters to the needs of the General Motors 4/6/8 cylinder engines running either an electronic advance distributor or wasted spark DIS system. The Jaguar board can also be used for other 4/6/8 cylinder engines using a Ford EDIS ignition system. The TC442x ICs specified in the Bill of Materials and in these assembly instructions can be used as logic level (5v) outputs to the logic level inputs on EDIS/DIS modules or battery voltage (13.6 to 14.4v) outputs.

This version of the manual includes instructions for the Jaguar Version 0.7-alpha PCBs, which were produced as a run of 50 bare PCBs by Andy Goss in June 2014.

Click on any image to view it full size.


Index

The Jaguar Assembly Manual by Andy Goss is based on the Puma-HowTo created and written by Preston Saunders, editing by Fred Cooke and mark-down design by Juha-Jarmo Heinonen.

Jaguar documentation is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.


<< Previous || Index || Next >>